Item Spotlights: 1. Client protocols support 1G to 11.3Gbps Ethernet, SDH STM 16/64, 1G/4G/8G/10G Fiber Chanel 2. Remote Management with Monitor Online Network Management Software 3. Supports 3R regeneration: techniques for re-amplification, re-timing and re-shaping 4. 2 different modes. Normal mode for CWDM or DWDM Transponder; Loopback mode for detection and troubleshooting. 5. Low latency less than 1.5μsSee more +
QSFPTEK offers the SFP/SFP+ OEO converter for the conversion of optical signals in the same format and the relay regeneration of optical signals. It is often used for single-multi-mode conversion on the client side in DWDM networks, and can significantly extend the link transmission distance when used in OA sites. Common in Metro, Regional and Long Haul WDM 10G optical networks, this device is an affordable solution. The 2U chassis can install 8 OEO line cards, which can be applied to 32ch DWDM network.
Transmission Speed |
1Gbps to 11.3Gbps |
Transmission Distance |
Up to 80km |
Interface Type |
SFP/SFP+ |
Transceiver Slot Number |
8 |
Equipment Function |
3R Repeater* |
FMT Chassis Dimensions (HxWxD) |
1.75"x19"x11.81" (44.5x482.6x300mm) |
Power Consumption |
<20W |
Housing |
Pluggable Module (Occupies 1 slot in FMT chassis) |
Latency |
<1.5μs |
Temperature |
Operating -10 to 70°C (14 to 158°F) |
This transponder supports multi-protocol parallel transmission, including 1G to 11.3G Ethernet, SDH STM-16/64, and 1/2/4/8/10G Fiber Channel.
3 types of application. Fiber mode conversion. Wavelength conversion. Signal type conversion. Also can be used as a fiber repeater(3R).