Welcome to QSFPTEK Global Free shipping on orders over US$ 79.8 US and Poland Local warehouse
Add to Cart
1. 48x 10G SFP+ports and 8x 100G QSFP28 uplink ports 2. 2 hot-swap AC power supplies (1+1 redundancy), 4 hot-swap smart fans 3. Up to 2.56 Tbps Switch capability and 1905 Mpps forwarding rate 4. RDMA reduces latency and CPU consumption 5. Support Data Center features including VARP, VXLAN, EVPN, GRE, and NVGRE 6. Support MLAG (Multi-Chassis Link Aggregation) for Networking Reliability 7. Support LACP / ECMP / VRRP / VARP / STP/RSTP/MSTP / to protect the network traffic all around effectivelySee more
QSFPTEK S7600-48X8C L3+ aggregation switch is designed with 48x 10G SFP+ ports and 8x 100G QSFP28 uplinks. This network switch delivers a 2.56 Tbps switching capacity and 1905 Mpps forwarding rate to meet high-performance aggregation layer requirements. This 10G switch with 2 hot-swap AC power supplies (1+1 redundancy) and 4 hot-swap smart fans, the switch provides hardware redundancy for high reliability.
As a layer 3+ managed switch, it supports full layer 3 features (static routing, RIP, OSPF, BGP, etc.) and advanced data center features such as MLAG for high-reliability and VXLAN, NVGRE, GENEVE tunnel technology for virtual networking.
S7600 series Aggregation switches support remote direct memory access (RDMA), which over other network APIs for lower latency, CPU load, and higher bandwidth. This 48-port 10Gb switch caters to the Ethernet aggregation platform to HCI (hyper-converged infrastructure), cloud networking, data center, and enterprise applications.
Scenario 1:
Related Products:
10G SFP+ Optical Transceiver Modules
Scenario 2 (Two S7600-48X8C switches in an MLAG Pair):
Related Products:
10G SFP+ Optical Transceiver Modules
100G QSFP28 Optical Transceiver Modules
10G SFP+ ports for access or aggregation switches, 100G uplinks for core switches. 56 Ports Meet the Needs of High-density Deployment
The switch running MLAG can be connected through a peer-link link and perform link aggregation negotiation with the host in the same state. After the M-LAG member devices receive the traffic sent by the access device through link bundling and load sharing, they can jointly perform negotiate link aggregation traffic forwarding.
RDMA(Remote Direct Memory Access) provides high throughput and ultra-low latency with low CPU overhead. Once end-to-end network connectivity is established, PFC(Priority Flow Control) and ECN (Explicit Congestion Notification) can be enabled to ensure lossless transport for RoCE traffic.
Dual power supplies allow for on-the-fly replacements, the chassis features front-to-back airflow, and fans automatically adjust speed to control noise and power consumption.
5 stars
64 Reviews
4 stars
0 Reviews
3 stars
0 Reviews
2 stars
0 Reviews
1 stars
0 Reviews
Via Live Chat
Chat NowSend an E-mail
mailto:sales@qsfptek.comMake a Call
(858)583-6532
Verified Purchase
Helpful
8
Confirmation
Successfully added shopping cart
Series 1G/10G Switches
Models S7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
I need some high-density 10G port switches. I have purchased a lot of equipment from QT before, and I still choose to trust them this time. On the recommendation of my account manager, I chose this S7600-48X8C. It has 48 10G ports, which is perfect for my needs, and the price is great too!
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
I recently purchased the S7600-48X8C switch and am delighted with its hot-swappable power supplies. The seamless hot-swapping feature ensures uninterrupted functionality. Moreover, the sales representative provided exceptional service, guiding me through the purchase process. Looking forward to experiencing its performance firsthand!
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
The two hot-swappable power supplies were one of the reasons I chose to buy this product, because even if one power supply fails, it doesn't bring my network to a complete halt. This switch provides 48 10G ports, which is very suitable for use in high-density environments. It also supports features such as VxLAN and MLAG. At this price, what else is there to be dissatisfied with.
Models48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
For me personally, the initial setup is pretty straightforward. I have experience with the product so that helps. If you're an experienced user, it shouldn't be too difficult to implement. Otherwise, you're going to have to spend some time learning about it and how it works.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
One of the biggest advantages of this switch is that it supports multiple protocols, which makes it very versatile and perfect for different network setups. I was able to configure it easily and connect multiple devices without any issues. The build quality is solid and it looks great too.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
Deploying and using these L2/L3 switches is EASY. They support various routing protocols, architectures, and connection types, which makes them highly versatile. After using them for a while, it becomes evident why they're so widely favored.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
We are very pleased with the performance of the S7600-48X8C switch we purchased from QSFPTEKN, it can be easy managed through CLI Web management. how to say if you have advanced functions needs with a limited budget, highly recommend it!
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
I have purchased many QSFPTEK transceivers before and they work well and at a better price compared to other companies. Through the introduction of my account manager, I placed an order for the S7600-48X8C, and after testing it works very stable and is easy to operate. Choosing QSFPTEK is always the right choice.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
At first, I was concerned about the compatibility of the QSFPTEK switches with my modules, but after testing them I found they worked well. I purchased the S7600-48X8C to use with my SFP+ modules and it also connects to the 100G switch via uplink, allowing me to easily upgrade to a 100G network.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0
Due to the growth of my business, I need devices with faster transmission rates. Since most of my previous devices were SFP+ ports, this time I want to upgrade to 100G rate. My account manager recommended the S7600-48X8C, which has 48 SFP+ ports and 8 QSFP28 ports and can connect to the QSFP28 switch via uplink while connecting to the old equipment. It was great to be able to maximize the use of my existing equipment so I could upgrade.
ModelsS7600-48X8C | 48x 10G SFP+ | 8x 100G QSFP28 | L3+
Series1G/10G Switches
Verified Purchase
Helpful
0