• Support data center features incl. MLAG/VXLAN/EVPN/VARP/PFC • Support RDMA for lower latency, lower CPU load and higher bandwidth • 1+1 AC Hot-swappable Power Supplies, 2+1 Built-in Fans • Support CLI/WEB/Telnet/SSH/SSL/SNMP for Flexible Management • Support 802.1x, Radius, Tacacs+, ACL, QoS, DDOS, DHCP for High Security • Support MSTP/ERPS/VRRP/LACP for High ReliabilitySee more
The QSFPTEK S7600-24X2Q 24-port 10Gb Ethernet switch comes with 24x 10Gb SFP+ and 2x 40Gb QSFP+ uplinks ports (each QSFP+ port can be split to 4x 10G ports), providing converged 10G and 40G fiber links. It delivers 640 Gbps switching capacity and 480 Mpps forwarding rate to meet high-performance aggregation layer requirements.
As a layer 3+ managed switch, it supports full layer 3 features (static routing, RIP, OSPF, BGP, etc.) and advanced data center features such as MLAG for high-reliability and VXLAN, NVGRE, GENEVE tunnel technology for virtual networking.
S7600 series switches support remote direct memory access (RDMA), which over other network APIs for lower latency, CPU load and higher bandwidth. This 24 port 10Gb switch caters to the Ethernet aggregation platform to HCI (Hyper-Converged Infrastructure), Metro, Data Center, and Enterprise application.
Scenario 1: 40G-to-40G-to-10G Direct Connectivity
Related Product:
Cisco QSFP-40G-SR4 Compatible 40GBASE-SR4 QSFP+ 850nm 150M DDM MTP/MPO MMF Transceiver
1m (3ft) MTP-12 (Female) to MTP-12 (Female) OM4 Trunk Cable, 12 Fibers, Type B, Plenum (LSZH)
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver
LC UPC to LC UPC Duplex 2.0mm PVC OM4 Multimode Fiber Optic Patch Cable 0.5m
Scenario 2: Configure VRRP on a pair of S7600-24X2Q to operate as a single virtual router, ensuring networking equipment redundancy and high reliability.
Related Product:
Cisco QSFP-40G-SR4 Compatible 40GBASE-SR4 QSFP+ 850nm 150M DDM MTP/MPO MMF Transceiver
1m (3ft) MTP-12 (Female) to MTP-12 (Female) OM4 Trunk Cable, 12 Fibers, Type B, Plenum (LSZH)
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver
LC UPC to LC UPC Duplex 2.0mm PVC OM4 Multimode Fiber Optic Patch Cable 0.5m
High-Performance L3+ 10G Aggregation Switch with 40G Uplinks
S7600-24X2Q has 24x 10G SFP+ ports and 2x 40G QSFP+ uplinks, providing converged fiber connections downlink to 10G access and uplink to 40G core.
With a switching capacity of 640 Gbps and a forwarding rate of 480 Mpps, it also meets high-performance requirements at the layer 3+ aggregation platform
to next-generation Enterprise, Data Center, Metro and HCI networks.
1+1 Hot-Swappable Power Supplies and 2+1 Built-in Fans for Hardware Redundancy
Hot-swappable 1+1 redundant power supplies allow power supplies to be replaced without shutting down the system.
The front-to-rear airflow of 2+1 fans can automatically adjust speed to control noise and power consumption.
RDMA (Remote Direct Memory Access) provides high throughput and ultra-low latency with low CPU overhead.
Once end-to-end network connectivity is established, PFC (Priority Flow Control) and ECN (Explicit Congestion Notification) can be enabled to ensure lossless transport for RoCE traffic.
Applied for Traditional 3-Tier Architecture as Aggregation Layer Switch
S7600-24X2Q can be used as an aggregation switch in the traditional 3-tier architecture to downlink 10G access layer switches and uplink 40G core layer switches.
MLAG Ensures Equipment Reliability and Link Redundancy
MLAG (Multi-Chassis Link Aggregation) aggregates links across different devices to achieve device-level redundancy and high-reliability network solution.
5 stars
52 Reviews
4 stars
0 Reviews
3 stars
0 Reviews
2 stars
0 Reviews
1 stars
0 Reviews
I've been looking for a switch with multiple 10G ports. I've bought switches from other brands before, but they were too expensive. For long-term development, I chose a QT switch, which has 24 10G SFP+ ports and 2 100G QSFP28 uplink ports to meet my business needs. In addition, it supports CLI and WEB management, and with its surprisingly low price, there's no reason not to choose QT.
Models24x 10G SFP+, 2x 100G QSFP28 Uplink | L3+
Series1G/10G Switches
0
0
On-time delivery as promised.I misconfigured the switch when I first got it, but QT gave me technical support until my device was running smoothly.Finally, I would like to recommend my sales consultant Naya.Qin, she always understands the problems I say and gives me a quick solution, which makes me feel at ease.
Models24x 10G SFP+, 2x 40G QSFP+ Uplink | L3+
Series1G/10G Switches
0
0
QSFPTEK switches are the best overall. We have about 25 customers using the solution. The technical support from QSFPTEK is excellent.This allows me to choose any product I want without any worries.
Models48x GE RJ45, 4x 10GE SFP+ Uplink | L3+
Series1G/10G Switches
0
0