1. Connector: Duplex LC; with DDM 2. Low Power Consumption <0.8W 3. temp -40 to 85°C available 4. Compatiible with 200+ Vendors 5. Hot Pluggable SFP MSA CompliantSee more
Fortinet FN-TRAN-SX FR-TRAN-SX Compatible 1000BASE SX SFP transceiver module is equipped with an LC duplex connector, which is high-performance, cost-effective, supporting 1.25Gbps data rate and 550m transmission distance over multimode fiber (MMF). QSFPTEK 1000BASE SX transceiver is compatible with the IEEE 802.3z 1000BASE-SX standard.
This Compatible 1000BASE-SX SFP fiber optic transceiver module consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU control unit. All QSFPTEK manufactured 1G SFP optical transceivers satisfy class I laser safety requirements.
|
Part Number |
FN-TRAN-SX FR-TRAN-SX |
Vendor Name |
QSFPTEK |
|
Form Factor |
SFP |
Data Rate |
1.25Gbps |
|
Wavelength |
850nm |
Distance |
550m |
|
Connector |
LC Duplex |
Cable Type |
OM2 MMF |
|
Transmitter Type |
VCSEL |
Receiver Type |
PIN |
|
TX Power |
-9.5 ~ -3dBm |
Receiver Sensitivity |
< -18dBm |
|
Power Consumption |
< 0.8W |
Modulation Format |
NRZ |
|
DDM |
Support |
Bit Error Ratio (BER) |
1E-12 |
|
Protocols |
IEEE 802.3z, SFF-8472, SFP MSA Compliant |
Warranty |
3 Years |
1000BASE-SX SFP Transceiver Interconnection Solution
Related Products:
• LC UPC to LC UPC Duplex OM3 2.0mm PVC Multimode Fiber Optic Patch Cable (MMF))
The 1000BASE-SX SFP Optical Module Connectivity Testing on Switches
Every module is quality tested for compatibility in the multi-brand switches environment, which guarantees flawless operations.
Every unit sold undergoes rigorous quality testing, to ensure compatibility in the target switch environment, guaranteeing perfect operation.
Every module is qualified through rigorous procedures and advanced equipment to ensure high-quality and reliable optical devices for you.
5 stars
51 Reviews
4 stars
1 Reviews
3 stars
0 Reviews
2 stars
0 Reviews
1 stars
0 Reviews
QT-SFP-0301D.pdf
I purchased it to connect a TP-Link switch that only supports 10 Gigabit Ethernet to the rest of a gigabit network. It worked immediately without any problems.
Transceivers typeGLC-T
CompatibleCisco
0
0
25G LWDM transceiver is a very nice choice of 5G front-haul, connected with the 5300 series switch the data deliver stably, 3 years warranty is nice and any problem they would provide professional solutions I think, it would be perfect place the order with a discount next time. Thanks.
Transceivers typeGLC-EX-SM1550-40
CompatibleCisco
0
0
I only pay very small spending to get such a nice product. the only defect is it works a little hot but has no effect on the network system, hope they can pay attention to this problem and improve satisfaction with the service and products.
Transceivers typeGLC-LH-SM
CompatibleCisco
0
0