1. Support Simplex Fiber Transmission 2. DFB+PIN; Low Power Consumption <0.8W 3. Applied in Data Center and Campus Networks 4. Fully Compatible with 100+ Vendors 5. SFP+ MSA CompliantSee more +
The Brocade 10G-SFPP-BXD compatible SFP+ optical transceiver is equipped with an LC simplex connector, reaching a link up to 10km over G.652. This 10G BiDi SFP+ transceiver, featured with carrying information in both directions via a single strand, can double your network capacity and save your cable resources. QSFPTEK manufactured 10GBASE-BX BiDi SFP+ transceiver module is compliant with SFP+ MSA, IEEE 802.3ae, SFF-8431. Besides, DDM (digital diagnostics monitoring) function is supported on the 10G fiber optic transceiver to achieve real-time operating parameters monitoring. It's also fully compatible with almost all Brocade devices.
Model Name: SFP-10G-LR | Vendor Name: QSFPTEK |
Form Factor: SFP+ | Data Rate: 10Gbps |
Wavelength: 1330nm-TX/1270nm-RX | Distance: [email protected] |
Connector: LC Duplex | Cable Type: OS2 SMF |
Transmitter Type: DFB | Receiver Type: PIN |
TX Power: -5~0dBm | Receiver Sensitivity: <-14dBm |
Power Consumption: <0.8W | Modulation Format: NRZ |
DDM: Support | Bit Error Ratio (BER): 1E-12 |
Protocols: IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432 | Warranty: 3 Years |
Bought 10G BiDi modules in QSFPTEK again. QSFPTEK has a very good price on it. All the 10G modules I bought here work nicely for my device. At the same time, QSFPTEK's service has also met our expectations. Customer service Talia has been very careful to explain to us and solved many of our problems.
Transceivers typeSFP-10G-BX40U
CompatibleCisco
0
0
Our data center has been considering upgrading our old equipment last month. The advertisement of QSFPTEK attracted us. After a lot of comparisons, we finally chose QSFPTEK to build our 10g bidi Ethernet network. After using it for one month, it has been running very stably on Cisco equipment without any failure.
Transceivers typeSFP-10G-BXU
CompatibleCisco
0
0