Welcome to QSFPTEK Global Free shipping on orders over US$ 79.8 US and Poland Local warehouse
Add to Cart
1. The Auto-Negotiation RJ45 port supports MDI/MDI-X adaptive functionality with a speed of 10/100/1000Mbps. 2. A High-performance QoS function is available on each port to enhance network performance. 3. The low-power consumption chip includes a built-in heat sink, ensuring efficient and long-lasting operation. 4. LEDs provide convenient status indications for Ethernet and fiber link connections. 5. The maximum transmission distance is determined by the inserted modules.See more
The Gigabit Ethernet media converter enhances communication distance and efficiently transmits data through fiber optic cables. It is designed to meet the increasing demand for higher power requirements in network equipment like network cameras, VOIP telephones, wireless LAN access points, and other devices. By leveraging the RJ45 interface, this media converter enables the direct delivery of data and power to network devices without additional power outlets or electrical cabling. The QSFPTEK media converters offer compatibility with a wide range of transceiver modules, including general 1000Base SFP transceivers, BIDI transceivers, CWDM transceivers, and more. It is essential to ensure consistency in the wavelength, speed rate, and distance of the transceiver modules used at both ends of the media converter.
Ports |
1 x 1000Base-X SC Port 1 x 10/100/1000M RJ45 Port (Auto MDI/MDIX) |
Standards and Protocols |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3x |
Cable Type (Fiber) |
Single-mode 9/125µm |
Cable Type (Copper) |
UTP Cat5e, 6, 6a Cable (Maximum 100m) |
LED Indicators |
TP/LNK,1000M, FX/LNK, PWR |
Processing Type |
Store and Forward |
Power Consumption |
Full-load<3W |
Jumbo Frame |
9k |
Operation Mode |
10/100Mbps for Half/Full duplex 1000Mbps for Full Duplex |
Dimensions (HxWxD) |
0.79''x2.36''x3.54'' (26x70x94mm) |
MTBF (hrs) |
>50,000Hrs |
Latency |
20us |
Operating Temperature |
-10°C to 55°C |
Input Power |
DC 5-12V |
Relative Humidity |
5%~90% (Non-condensation) |
Warranty |
1 year |
Related Products:
S5300-48T4X, 48-Port Gigabit Ethernet L2+ Switch, 48x GE RJ45, with 4x 10GE SFP+, Support Stacking
S5300-48T6X, 48-Port Gigabit Ethernet L3 Switch, 48x GE RJ45, with 6x 10GE SFP+, Support Stacking
1ft (0.3m) Cat5e Network Ethernet Patch Cable Snagless Unshielded (UTP), PVC CM, Blue
SC UPC to SC UPC Simplex OS2 2.0mm PVC Fiber Optic Patch Cable 1m
Related Products:
S5300-48T4X, 48-Port Gigabit Ethernet L2+ Switch, 48x GE RJ45, with 4x 10GE SFP+, Support Stacking
Cisco Compatible 1000BASE-BX BiDi SFP 1310nm-TX/1550nm-RX 10km DOM SC SMF Transceiver Module
1ft (0.3m) Cat5e Network Ethernet Patch Cable Snagless Unshielded (UTP), PVC CM, Blue
SC UPC to SC UPC Simplex OS2 2.0mm PVC Fiber Optic Patch Cable 1m
Flexible signal extension and conversion
By utilizing media converters and fiber optic cables, the link can be extended to longer distances, allowing for the migration of the network to fiber while leveraging the existing copper cable infrastructure.
Easy and Efficient Operation
Hot-swappable design, plug-and-play. Easy to install and troubleshoot, no additional configuration is required for connectivity.
LFP Rapid Alarm Link Failure
LFP (Link Fault Pass-through) functionality enables quick detection of failed links within a short timeframe, minimizing potential losses caused by link failures.
5 stars
11 Reviews
4 stars
0 Reviews
3 stars
0 Reviews
2 stars
0 Reviews
1 stars
0 Reviews
Via Live Chat
Chat NowSend an E-mail
sales@qsfptek.comMake a Call
(858)583-6532
Verified Purchase
Helpful
8
Confirmation
Successfully added shopping cart
Series 1G Converter
Models 1x 1G RJ45 to 1x 1G SC, 40km, 1550nm