• Support 2 Units of S5300-16S8TS4X Stacking • Rich L2++ Features: Static Routing, RIP, OSPF, VRRP • Support IPv4/v6 dual stack Protocol • Support LACP, MSTP, EAPS, ERPS, VRRP, ISSU for High Reliability • Supports 802.1x, Radius, Tacacs+, ACL, QoS, DDOS, DHCP for High Security • Support CLI/WEB/Telnet/SSH/SSL/SNMP for Flexible ManagementSee more
The QSFPTEK S5300-16S8TS4X 16-Port Gigabit Ethernet switch comes with 16x 1G SFP, 8x 1G RJ45/SFP combo, 4x 10G SFP+ uplink ports. The 24 1G ports provide converged fiber/copper gigabit connectivity for high-density end clients, and the 4 10G ports allow for uplink to 10G aggregation switch. It delivers 128 Gbps switching capacity and 96 Mpps forwarding rate to meet high-performance access layer requirements.
S5300-16S8TS4X is a stackable switch, allowing up to 2 switches to be interconnected over uplink ports and managed as a single device, delivering a scalable solution for expanding the network environment. Besides, this managed switch supports rich layer 2++ features, such as static routing, RIP, OSPF, VRRP, load balancing based on source or source/destination port number, etc. This layer 2++ switch is designed as a gigabit access switch for SMB, enterprise, and campus networks.
Related Products:
S7300-24X2C 24-Port Ethernet L3 Campus Switch, 24x 10Gb SFP+, 2x 100Gb QSFP28, Support Stacking
Cisco SFP-10G-SR-S Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver Module
LC UPC to LC UPC Duplex OM4 2.0mm PVC Multimode Fiber Optic Patch Cable 1m
Related Products:
S7300-24X2C 24-Port Ethernet L3 Campus Switch, 24x 10Gb SFP+, 2x 100Gb QSFP28, Support Stacking
Cisco SFP-10G-SR-S Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver Module
LC UPC to LC UPC Duplex OM4 2.0mm PVC Multimode Fiber Optic Patch Cable 1m
S5300-16S8TS4X has 16x 1Gb SFP, 8x Gigabit RJ45/SFP Combo and 4 x 10Gb SFP+ uplinks, providing converged fiber and copper connections downlink to 1G access and uplink to 10G aggregation. With a switching capacity of 128 Gbps and a forwarding rate of 96 Mpps, it also meets high-performance requirements at the layer 2++ access.
Use 10G uplink ports to stack two S5300-16S8TS4X into a logically one unit, making management more convenient and delivering a scalable solution for expanding the network environment.
S5300-16S8TS4X can be used as an access switch in the traditional 3-tier architecture to downlink end clients and uplink to 10G aggregation.
5 stars
124 Reviews
4 stars
1 Reviews
3 stars
0 Reviews
2 stars
0 Reviews
1 stars
0 Reviews
It was very easy to order the product and got the order confirmation almost immediately, and the same day the products were shipped. We received them in good condition within two days.Plus, it's cheap. Super bonus.
Models48x GE RJ45, 4x 10GE SFP+ Uplink | L2++
Series1G/10G Switches
0
0
Got this switch for working with equipment at work, and so far it has been great. I needed the Gigabit speed, this switch did it.a AC 220V power supply supporting dual power.Plug and play and anything else.Will continue purchasing on QSFPTEK.
Models48x GE RJ45, 6x 10GE SFP+ Uplink | L3
Series1G/10G Switches
0
0
Overall, the campus switch is a robust and reliable networking solution that delivers high performance, advanced security features, and ease of use for network administrators. Please keep the low price,then more order be supported.
Models48x 100M/1000M/2.5GBASE-T RJ45, 4x 1G/10G SFP+ and 2x 40G QSFP+ Uplink | L3
Series1G/10G Switches
0
0